Ordering mosquito nets sounds like a project, but the actual process is simple. Two visits, a bit of workshop time in between, and no mess left behind. This article walks through exactly what happens, so there are no surprises when you book a mosquito nets in Dubai installation.
Knowing the steps also helps you get a better result. A little preparation before each visit makes the fitter’s job easier and the finished screens better.
Step 1: the call or message
It starts with a call to +971 52 443 2655 or a WhatsApp message to https://wa.me/971524432655. You describe roughly what you need: how many windows and doors, the type of property, and which emirate you are in. The team schedules a measurement visit at a time that suits you, including evenings and weekends in most cases.
Before the visit, walk through your home and note which openings matter most. Count the windows and doors you want netted. Note which windows slide and which swing open. Flag anything unusual, like a window with a damaged frame or a door that sticks. You do not need exact measurements. That is the technician’s job.
Step 2: the free measurement visit
The technician visits your home and measures every opening you want netted. This is not just width and height. They check the frame type, the available mounting surfaces, how each window opens, and where a screen frame can fix without interfering with handles, locks or existing tracks.
This is also the advisory part of the visit. The technician recommends a screen type per opening: fixed, roller or sliding for windows, hinged, sliding or pleated for doors. They will explain why, and you can ask questions about mesh types, colours and options like pet-resistant mesh or removable panels.
Then comes the quote. The quote is free at the measurement visit. You get the full scope and the full figure before anything is made, with no obligation. If you want to think about it, the measurements stay on file.
Step 3: workshop making
After you approve the quote, your screens are made in the Dubai workshop. Aluminium profiles are cut to your exact measurements, corners are joined, mesh is fitted and tensioned, and moving parts like rollers, tracks and closers are assembled and tested.
Workshop making is the reason fitted screens seal properly. Each frame matches its opening to the millimetre. This stage usually takes a few working days depending on the size of the order and the workshop schedule.
Step 4: fitting day
The fitting team arrives with your finished screens and the tools to install them. For each opening, they test-fit the frame, fix it in place, seal the edges and check the operation. Roller nets get rolled up and down several times. Sliding screens get slid back and forth. Hinged doors get opened, closed and closer-adjusted.
A typical villa takes a few hours for a full set of windows and doors. There is no heavy construction. Fixing is with screws and clips into the window and door frames, plus sealant where needed. The team cleans up as they go, and there is no painting or plastering involved.
Before the team leaves, walk the house with them. Open and close every screen yourself. Check every edge for gaps. If a sliding panel drags or a closer slams, say so on the spot. Adjustments take minutes on fitting day and are part of the job.
Step 5: aftercare
Mosquito nets need little maintenance. Wipe the mesh with a damp cloth every couple of months to clear dust, and wipe sliding tracks and roller guides so they keep moving smoothly. Check brush seals once a year and replace any that have flattened.
If a mesh tears or a mechanism needs attention later, the workshop that made the screens can repair them. Keep the workshop’s number. Screens made locally are serviceable locally, which is one of the quiet advantages of ordering from a Dubai workshop instead of buying readymade.
Planning the whole house? Read nets for the whole home for a room-by-room approach.
FAQ
Do I need to be home for the measurement visit?
Yes, someone needs to let the technician in and walk them through which openings to measure. The visit itself is quick, usually well under an hour for a villa.
Is there drilling involved?
Yes, small fixings go into the window and door frames. The holes are minor and hidden by the screen frame itself. There is no structural work and no damage to walls.
How long between measurement and fitting?
The workshop needs a few working days to make your screens after you approve the quote. The team will give you a fitting date at the measurement visit or shortly after.
Can fitting happen in one visit?
For most homes, yes. The full set of screens for a villa is usually fitted in a single visit of a few hours. Very large orders may be split across two visits.
Which areas do you serve?
The workshop is in Dubai and fitting covers Dubai, Sharjah, Ajman, Abu Dhabi and Ras Al Khaimah. Call +971 52 443 2655 or WhatsApp https://wa.me/971524432655 to book the free measurement visit.
Screen the door. Keep the breeze.
Free measurement. Made in our workshop. Fitted across seven emirates.
